Need help?Do you have a question about the Kozumi air force one 2 lite and is the answer not in the manual?
General| Brand | Kozumi |
|---|---|
| Model | air force one 2 lite |
| Category | Wireless Access Point |
| Language | English |
Guide for fixing the CPE onto a pole, including water resistance tips.
Procedure to reset the Access Point to its original factory default settings.
Introduction to web-based management and default network parameters.
Configure parameters for the local area network, including IP address and subnet mask.
Configure basic wireless parameters like band, mode, network type, SSID, and channel.
Setup wireless security using WEP or WPA to prevent unauthorized access.
Configure wireless parameters like band, mode, network type, SSID, and channel.
Configure advanced wireless parameters like authentication, thresholds, and data rates.
Configure encryption methods, authentication types, and cipher suites.
Set pre-shared keys and format for WPA/WPA2 Personal authentication.
Configure RADIUS server details for enterprise authentication.
Configure WEP key length, format, default key, and encryption keys.
Configure access control mode and register clients by MAC address.
View and manage the list of clients allowed access.
Enable and configure the Wireless Distribution System by adding other APs.
Configure encryption, key format, and pre-shared keys for WDS.
Select the firmware file and upload it to update the device.
Reset the configuration to factory default settings.
Set the username and password for accessing the web interface.
Verify physical connections, adapter status, and IP address configuration.
Test network connectivity to the Access Point using ping.
Confirm the wireless client is correctly associated with the access point.
Verify the wireless client's IP address is within the AP's range.
Explanation of Wi-Fi Protected Access (WPA) and its successor WPA2.
To Next Page