Need help?Do you have a question about the Kozyard Morgan and is the answer not in the manual?
Essential safety guidelines for assembly, including handling sharp parts and small items.
Guidelines for a smooth assembly process, tools needed, and team size.
Diagram detailing the pergola's anchoring dimensions and layout.
Comprehensive list of all components and hardware required for assembly.
Prepare poles by removing plugs and attaching Part X using Bolt J.
Connect Part I to the poles using Bolt J.
Connect side tubes to assemble Main Beams 1 and 2, attaching Part R.
Connect Main Beams to the four poles using Bolt M.
Insert Hooks N into Part D and Hooks P/O into Part E.
Connect side track tubes to assemble the Cross Beams using Bolt J.
Connect the assembled Cross Beams to the four poles using Bolt M.
Assemble Cross Beams (E & E1) and (F & F1) using Bolt J.
Connect the Cross Beams (E, E1, F, F1) to the Main Beams.
Insert canopy support rods (G, G1, H, H1) into the canopy.
Connect canopy supports to main beams and secure the canopy.
Hang the top fabric (Part T) on Hook P.
Secure the top fabric to the beam B/B1.
Secure the pergola base to the ground using Part U.
Ensure all screws are completely tightened before use.
Guidelines for cleaning frame components and fabric with mild soap solution.
Information on warranty coverage for frame, fabric, and netting.
Recommendation to inspect and tighten bolts and fasteners regularly.
Contact information for Kozyard customer support for parts and replacements.
Links to follow Kozyard on social media platforms like Instagram.
To Next Page
General
