Figure 8 and Table 8 define the underside of the 105S 1:5 High Resolution
s-Video DA:
Figure 8: 105S 1:5 High Resolution s-Video DA Underside
Table 8: Features and Functions of the 105S 1:5 High Resolution s-Video DA Underside
Adjust the luma level of the output
7.1 Connecting the 105S 1:5 High Resolution s-Video DA
To connect your 105S 1:5 High Resolution DA, as illustrated in Figure 9, do
the following:
1. Connect an s-Video source (for example, an s-Video player) to the INPUT
4-pin connector.
2. Connect the OUT 4-pin connectors to up to 5 s-Video acceptors (for example,
s-Video recorders)
2
3. Connect the power adapter to the power socket, and connect the adapter to the
mains electricity.
.
4. If required, adjust the underside chroma and luma level trimmers
3
1 Insert a screwdriver into the small hole and carefully rotate it to adjust the audio level
.
2 You do not have to connect all the outputs
3 Insert a screwdriver into the small hole and carefully rotate it to adjust the level
To Next Page
Loading...
