Kramer KT-107 Quick Start Guide

KT-107 Quick Start (P/N: 2900-300935QS REV 3)
P/N:
2 9 0 0 - 3 0 0 9 3 5 Q S
Rev:
3
Scan for full manual
KT-107 Quick Start Guide
This guide helps you install and use your KT-107 for the first time.
Go to www.kramerav.com/downloads/KT-107 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
KT-107 Touch Panel
Tabletop mount
On-wall mount unit
1 Quick start guide
1 C-USB/MicroB cable
AC/DC adapter
Installation screws
Panel mount plate
1 right-angle OTG USB cable
Step 2: Get to know your KT-107
#
Feature
Function
1
Hidden Reset Button
Located on top-side. Insert a pin and hold for a few seconds to reset KT-107.
2
Light Sensor
Automatically adjusts the screen brightness according to the room lighting conditions.
3
Activity RGB LED
Lights green when powered, flashes green when charging the battery, lights red when
camera on.
4
Camera
For remote room viewing or video conferencing.
5
Microphone
For audio communication, recording or conferencing.
6
Speakers
To output the sound.
7
Control Button
Press and hold (for 2 seconds) to open the pop-up menu which lets you power down
the unit, reboot it or return to the Home-page. The Control button is password
protected (default: Kramer).
8
Tabletop Mount Connector
For connecting to the tabletop mount.
9
Cover
Covers the wall mount connections and power button.
10
Power Button
Press to power on the KT-107. When powered, press briefly to open the pop-up menu
and power down the device, reboot it or return to the Home-page. Press and hold to
power down the device immediately. This button is also used for firmware upgrade.
11
Volume-up Button
Used for firmware upgrade. Use also to increase KT-107 speaker volume.
12
Micro USB Port
For connecting to an adjacent on-wall USB device and for firmware upgrade.

Kramer KT-107 Specifications

General

Brand	Kramer
Model	KT-107
Category	Touch Panel
Language	English