Kramer KT-107 Quick Start Guide

For KT-107 model: FCC-ID-R8S-KT-107
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following conditions:
 This device may not cause harmful interference
 This device must accept any interference received, including interference that may cause undesired operation
Recommendations for safe exposure to non-ionizing radiation: Only use the device at least 20 centimeters away from your body.
Technical Specifications:
Tabletop Mount Ports:
1 1000/100/10BaseT Ethernet on RJ-45 connector; 1 micro USB 2.0
2-pin terminal block for DC power supply
On-wall Mount Ports:
1 1000/100/10BaseT Ethernet on RJ-45 connector
1 2-pin terminal block connector for DC power supply
Speakers:
2x1 W, 8 ohm
Microphone:
-42dB ±3dB @ 1kHz sensitivity
CPU Performance:
1.6GHz Quad Core, GPU, 2GB RAM, 16GB Flash
OS Software:
Android 6.0.1
Multi Touch:
10 points, 2-finger gesture
Display:
7” IPS, 1280x800 RGB pixels, 16:10 aspect ratio, ±80° horizontal/vertical viewing angles, 400cd/m2
brightness, 800:1 contrast ratio
Video Format:
Decoding: H.265/HEVC; H.264/AVC; MPEG-1/2/4; DivX 3/4/5/6; MVC; GOOGLE VP8; VC-1; H.263;
SORENSON SPARK; ON2 VP6; MOTION JPEG; Encoding:H.264/AVC
Ethernet Port:
10/100/1000Mbps PoE LAN
Wireless Communication:
Wi-Fi 802.11 b/g/n/ac, Bluetooth 4.0
Camera:
Front, 2M pixels, HD 720p
Battery:
Rechargeable, supports up to 3 hours of Wi-Fi operation
Controls:
Hidden reset button, power button, volume-up button
Touch panel status LED: flashes green during charging, green for fully charged, red for camera on
Power Inputs:
Power over Ethernet (complies with IEEE802.3af and IEEE802.3at PoE standards), power supply unit
Power Consumption:
5V DC, 3A
Operating Temperature:
0° to +40°C (32° to 104°F)
Storage Temperature:
-10° to +55°C (14° to 131°F)
Humidity:
10% to 90%, RHL non-condensing
Case Design:
Black body and cover
Dimensions:
Shipping dimensions:22.4cm x 13cm x 20.6cm (8.8" x 5.12" x 8.1"), W, D, H
Touch panel: 17.8cm x 1.3cm x 13cm (7" x 0.51" x 5.12"), W, D, H
Tabletop mount: 18.5cm x 10.7cm x 12.4cm (7.28" x 4.2" x 4.88"), W, D, H
Panel mount plate: 14.6cm x 3.7cm x 9.2cm (5.75" x 1.46" x 3.62"), W, D, H
On-wall mount unit: 14.6cm x 1.1cm x 9.1cm (5.75" x 0.43" x 3.58"), W, D, H
Weight:
Shipping weight: 1.8kg (3.97lbs) approx.; Touch panel: 0.37kg (0.8lbs) approx.
Included Accessories:
Power supply unit adapter (5V, 4.0A AC/DC), tabletop mount, on-wall mount unit,
panel-mount plate, right-angle OTG USB cable, installation screws
Certifications:
CE/CB, FCC, ROHS, REACH
Mounting Options:
Table top (with tabletop mount unit), on-wall (with mount unit and panel mount plate)
Specifications are subject to change without notice at www.kramerav.com

Kramer KT-107 Specifications

General

Brand	Kramer
Model	KT-107
Category	Touch Panel
Language	English