Kramer KT-2010 Quick Start Guide

KT-2010 / KT-2010WM Quick Start
P/N:
2900- 301683QS
Rev:
4
Scan for full manual
KT-2010 / KT-2010WM Quick Start Guide
This guide helps you install and use your KT-2010 / KT-2010WM for the first time.
Go to www.kramerav.com/downloads/KT-2010 or http://www.kramerav.com/downloads/KT-2010WM
to
download the latest user manual and check if firmware upgrades are available.
Step 1: Check what’s in the box
KT-2010:
10" Touch Panel 1 Quick start guide Table stand Mounting accessories
KT-2010WM:
10" Touch Panel 1 Quick start guide Wall mount for UK, EU and
USA one gang boxes
Mounting accessories
Step 2: Get to know your KT-2010 / KT-2010WM
# Feature Function
1
Display
Touch panel
2
Microphone
For audio communication, recording or conferencing.
3 Proximity Sensor Automatically adjusts the screen brightness and camera according to the room
lighting conditions.
4
Camera
For future use.
5
Reset
Located on the topside. Insert a pin and hold for a few seconds to restart.
6
Home Button
Press to wake up / darken the screen.
7
Restore Factory Reset Button
Insert a pin and hold for 22 seconds to reset the device to factory default values.
8
USB 3.0 Port
Multipurpose port for external connection.
9
USB Type-C Port
Multipurpose port for external connection.
10
LAN 1G(PoE) RJ-45 Port
Connect to the LAN for network communication.
KT-2010 / KT-2010WM is powered by PoE (power over ethernet) delivered through
the LAN port.
Optionally, you can connect the power adapter too (as backup).
11
Kensington Lock
Anti-theft security slot for locking the device.
12
12V/2A DC Connector
Connect to the power adapter (optional, purchased separately).

Kramer KT-2010 Specifications

General

Brand	Kramer
Model	KT-2010
Category	Touch Panel
Language	English