Kramer KT-208 Quick Start Guide

KT-208 and KT-208WM Quick Start
P/N:
2900- 301700QS
Rev:
5
Scan for full manual
KT-208 / KT-208WM Quick Start Guide
This guide helps you install and use your KT-208 / KT-208WM for the first time.
Go to www.kramerav.com/downloads/KT-208 or www.kramerav.com/downloads/KT-208WM to download
the latest user manual and check if firmware upgrades are available.
Step 1: Check what’s in the box
KT-208:
8" Touch Panel 1 Quick start guide
Table stand
Mounting accessories
KT-208WM:
8" Touch Panel 1 Quick start guide Wall mount bracket for UK, US
and EU single gang boxes
Mounting accessories
Step 2: Get to know your KT-208 / KT-208WM
# Feature Function
1
Display
Touch panel
2
Microphone
For audio communication, recording or conferencing.
3
Recessed Restart Button
Located on the top-side. Insert a pin and hold for a few seconds to restart.
4
Home Button
Press to wake up / darken the screen.
5
Camera
For remote room viewing or video conferencing.
6
Light Sensor
Automatically adjusts the screen brightness and camera according to the room
lighting conditions.
7
Speakers
To output the sound.
8
LAN 1G(PoE) RJ-45 Port
Connect to the LAN for network communication.
KT-208 and KT-208WM are powered by PoE (power over ethernet) delivered
through the LAN port.
Optionally, you can connect the power adapter too (as backup).
9
12V/1A DC Connector
Connect to the power adapter (optional, purchased separately).
10
Restore Factory Reset Button
Insert a pin and hold for 22 seconds to reset the device to factory default values.
11
Micro USB Port
For connecting to an adjacent on-wall USB device and for firmware upgrade.

Kramer KT-208 Specifications

General

Brand	Kramer
Model	KT-208
Category	Touch Panel
Language	English