Kramer KT-208 Quick Start Guide

Step 3: (Option 1) Mount KT-208 on a table
Simple Mounting (moveable table stand)
1. Run any cables that connect to the KT-208
through the center of the table stand (for
example the Ethernet cable).
2. Connect the cables to the KT-208.
3. Lay the KT-208 face-down and mount the table
stand on it.
4. Insert and fasten the M2.5 screw that secures
the bottom of the KT-208 to the table stand.
The table stand and touch panel are now
ready for use.
Secure Mounting (fixed table stand)
1. Secure the stand to the table using the two
5/32” screws.
2. Connect any necessary cables.
3. Mount the KT-208 on the stand.
4. Secure the KT-208 to the stand using the
provided M2.5 screw.
The table stand and touch panel are now
ready for use.
For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/KT-208.
Using third-party cables may cause damage!

Kramer KT-208 Specifications

General

Brand	Kramer
Model	KT-208
Category	Touch Panel
Language	English