Tavor 5-O - Technical Specifications
6 Technical Specifications
BUILT IN POWER AMPLIFIER:
2 x 30W RMS; 2 x 80W continuous program
45Hz to 20kHz @ -10dB
100Hz to 20kHz @ ±3dB
5 1/4” polypropylene cone with rubber edge woofer
Continuous: 105dB
Peak: 110dB
5.8 averaged 1kHz to 10kHz
7.6dB averaged 1kHz to 10kHz
Line level unbalanced stereo audio on a 3.5mm mini jack
Line level balanced stereo audio on a terminal block
connector
Line level unbalanced stereo audio on left and right RCA
connectors
Speaker (to connect to the external passive speaker)
3.5mm mini jack lineout for optional sub-woofer
3.5mm mini jack Loop output
STANDBY MODE POWER CONSUMPTION:
INPUTS SIGNAL FOR SYSTEM “WAKE-
UP” FROM STANDBY MODE:
Shipping and Installation
Aluminum grill, steel brackets, ABS cabinet
WEIGHT PER SINGLE SPEAKER:
Active Speaker: 2.7kg (5.95lbs) approx.
Passive Speaker 2.2 kg (4.85lbs) approx.
WEIGHT WITH MOUNTING KIT:
Active Speaker: 3.1kg (6.83lbs) approx.
Passive Speaker: 2.6kg (5.73lbs) approx.
SHIPPING WEIGHT (FOR PAIR):
18.3cm x 17cm x 24.4cm (7.2” x 6.7” x 9.6”) W, D, H
DIMENSIONS with mounting brackets:
18.3cm x 17.2cm x 26.5cm (7.2” x 6.8” x 10.4”) W, D, H
Front panel to wall (with mounting bracket): 22cm (8.7in)
Back panel to wall (with mounting bracket): 4.5cm (1.8in)
1 pair of U-shaped rotating mounting brackets with 4 mounting
knobs; 4m (13.12ft) power cord; 4m (13.12ft) loudspeaker
cable; and a 2m (6.6ft) 3.5mm to 2 RCA cable
Available in white or black
Specifications are within a 10% tolerance and are subject to change without notice at http://www.kramerelectronics.com