Step 3: Install TP-789Rxr
Install TP-789Rxr using one of the following methods:
Attach the rubber feet and place the unit on a flat surface.
Fasten a bracket (included) on each side of the unit and attach it to a flat surface. For
more information go to
www.kramerav.com/downloads/TP-789Rxr.
Mount the unit in a rack using an optional RK-3T rack adapter.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your TP-789Rxr. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to TP-789Rxr.
Connecting TP-789Rxr as a power provider:
Connecting TP-789Rxr as a power acceptor:
To Next Page
Loading...
