Kramer VIA GO2 Quick Start Guide

VIA GO2 Quick Start
P/N:
290 0 - 301 3 4 7QS
Rev:
2
Scan for full
manual
VIA GO2 Quick Start Guide
For Installer
This guide helps you install and configure your VIA GO2 for the first time.
Go to www.kramerav.com/downloads/VIA GO2 to download the latest user manual
and check if firmware upgrades are available.
Step 1: Check what’s in the box
VIA GO2 Collaboration Device
1 VESA mounting bracket
1 Quick start guide
1 Power supply (12V DC) with adapters for US, UK, and EU
1 VESA screw set
Step 2: Get to know your VIA GO2
#
Feature
Function
1
Micro SD Card Slot
Not in use.
2
Power Button with LED
Press to power ON or turn OFF the device.
3
USB 3.0 Connector
Connect to a USB device, for example, a keyboard or mouse.
4
USB 2.0 Connector
Connect to a USB device, for example, a keyboard or mouse.
5
Lock Opening
Connect to a security locking cable.
6
HDMI™ Connector
Connect to an HDMI sink.
7
RJ-45 Connector
Connect to a LAN (default mode).
8
Power Connector
Connect to the 12V DC power supply.
Step 3: Install VIA GO2
Place VIA GO2 on a flat surface, or mount on a wall or the back of a display using the included VESA mounting bracket:
1. Attach the VESA mounting bracket to
the back of the display with 4 screws.
2. Fasten two screws to the bottom of
VIA GO2.
3. Insert the screws on the bottom of
VIA GO2 into the slots on the mounting
bracket.

Kramer VIA GO2 Specifications

General

Brand	Kramer
Model	VIA GO2
Category	Conference System
Language	English