Always switch off the power to each device before connecting it to your
VM-2HN. After connecting your VM-2HN, connect its power and then
switch on the power to each device.
Connect the VM-2HN as illustrated in the example in Figure 2:
1. Connect an HDMI input source (for example, a Blu-ray player) to the HDMI
IN connector.
2. Connect the two OUTPUT connectors to up to two HDMI acceptors, as
follows:
Not all outputs need to be connected.
HDMI OUT 1 connector to HDMI acceptor 1 (for example, display 1)
HDMI OUT 2 connector to HDMI acceptor 2 (for example, display 2)
3. Connect the 5V DC power adapter to the power socket unit and then
connect the adapter to the mains electricity (not shown in Figure 2).
The ON LED lights.
To Next Page
Loading...