VW-16 Quick Start Guide
This guide helps you install and use your VW-16 for the first time.
Go to www.kramerav.com/downloads/VW-16 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VW-16 4x4 video-wall Driver with Multiviewer
Step 2: Get to know your VW-16
Rigid metal handles for easy handling.
After pressing a Window button (above), press an input button to select this input for
that window.
If the wall configuration has only one window, then pressing an input button will
select that input for the wall.
Press to select window A, B, C or D.
PRESET CONFIGURATION Buttons
Press a configuration button to set one of the following presets (each window in the
Multiview mode can be resized and repositioned via the embedded web pages):
Video wall mode – the video of one source only is presented over the
video wall.
Multiview mode, presenting 1 PiP window over a parent picture in the
video wall.
Multiview mode, presenting 2 PiP windows over a parent picture in the
video wall.
Multiview mode, presenting 3 PiP windows over a parent picture in the
video wall.
Multiview mode, presenting 4 windows over the video wall.
Press, followed by an Input button (1 to 4), to save the current wall configuration.