Kramer WP-789R

DECORA® design frames are included in US-D models.
DECORA® is a registered trademark of Leviton Manufacturing Co., Inc.
We recommend that you use any of the following standard 2 gang in-wall junction boxes (or their equivalent):
• US-D: 2 gang US electrical junction boxes.
• EU: 2 gang in-wall junction box, with a cut-hole diameter of 2x68mm and depth that can fit in both the device and the
connected cables (DIN 49073).
• UK: 2 gang in-wall junction box (BS 4662), 135x75mm (W, H) and depth that can fit in both the device and the
connected cables.
• EU/UK: 2 gang on-wall junction box (use the recommended Kramer on-wall box available at
www.kramerav.com/product/WP-789R.).
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your WP-789R. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to the WP-789R.
Wiring the RJ 45 Connectors
It is recommended that the cable ground shielding be
connected/soldered to the connector shield.
PIN EIA /TIA 568b
PIN
Wire Color
1
Orange / White
2
Orange
3
Green / White
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown
For optimum range and performance use the recommended Kramer cables available at
www.kramerav.com/product/WP-789R.