15
5.
Screw together lance and trigger gun
pressure-tightly.
Putting into operation
8.
Tightly screw together high-pressure
hose and trigger gun with safety catch.
9.
Connect water hose to water inlet.
The cleaner may be connected to a water
mains (1-10 bar pre-pressure) with either
cold or hot water (up to 60°C).
7.
Push on high-pressure hose to trigger
gun with safety catch.
6.
Unwind high-pressure hose straight
and without nooses. (When using hose
extensions take care that the max. length
of 20 m is not exceeded!)
To Next Page
Loading...
