16
10.
Connect to circuit.
Kränzle 1122 TS T:
110 - 127 V ~, 14 A, 60 Hz
The socket must be protected with a 16A
delay action fuse on the mains side.
11.
Put HP cleaner into horizontal posi-
tion. The machine must be operated in
horizontal position!
12
. Check water inlet filter for cleanli-
ness prior to putting the machine into
operation!
Manually unscrew hose attachment. Take
out the serial water inlet filter using needle
nose pliers and clean if filter is soiled.
13.
Prior to putting HP cleaner into
operation always check oil level at oil-
level glass.
(Make sure that cleaner is in horizontal
position!) The oil level must reach the top
edge of the “OK” marking.
Be careful when using hot water!
When running your high pressure cleaner with hot water
of 60° C raised temperatures occur. Do not touch the
metal parts of the cleaner without safety gloves!
To Next Page
Loading...
Need help?
General
