Need help?Do you have a question about the Kratki LEO/45/68 and is the answer not in the manual?
Overview of LEO series gas fireplace features and design.
Crucial safety precautions for installation, operation, and handling.
Step-by-step guide and requirements for installing the fireplace.
Specifies clearances and requirements for inspection doors.
Requirements for ventilation grate size and placement.
Housing, hearth protection, and installation regulations.
Choosing the installation location for optimal draft and access.
Details on coaxial ducts and approved concentric systems.
Guidelines for routing chimneys through walls/roofs and terminal types.
Requirements for chimney outlet placement relative to windows and roof edges.
Distances from ridge, obstacles, and specific placement rules.
Specifics for horizontal runs through side walls (Type C11).
Specifics for vertical runs through the roof (Type C31).
Guidelines for using an existing chimney with specific requirements.
Scheme of allowed concentric flue system runs for Type C61.
Instructions for disassembling deflectors for horizontal terminals.
Instructions for modifying deflector systems for horizontal terminals.
Adapting deflector assembly using covers for LEO70.
Installing the gas controller and receiver in the distribution box.
Proper connection of the receiver antenna to avoid interference.
Connecting the main burner module to the controller.
Compliance, fuel types, pressure, and adjustment ranges.
Default setting and thermocouple placement for control flame.
Step-by-step guide to adjusting gas outlet pressure.
Procedure for checking gas connections for leaks.
Connecting the power supply after other systems are connected.
Installing the fireplace using non-combustible materials.
Arranging elements without obstructing functions.
Initial startup steps and potential initial odors or wall tinting.
Wireless control, battery status, and automatic shut-off.
Introduction to the B6R-H9 remote and synchronizing it.
Changing between Celsius and Fahrenheit units.
Setting and using the child-proof feature.
Steps for lighting the fire using a single button.
Alternative method for lighting the fire using two buttons.
Switching the device to standby or off mode.
Setting the minimum and maximum flame heights.
Enabling, disabling, and setting the sleep timer.
Overview of thermostat and programmed operating modes.
Enabling, disabling, and setting thermostat mode.
Enabling programmed mode for timed operation.
Disabling programmed mode and returning to manual.
Setting switch-on/off temperatures and days.
Setting specific times for switching the device on.
Setting specific times for switching the device off.
How to switch the device on and off in Eco mode.
Replacing batteries in the remote and receiver.
Definitions of gas parameters like pressure and flow rate.
Technical specifications for LEO 45/68 and LEO 70 models.
Technical specifications for LEO 76/62 and LEO 100 models.
Specifications for LEO 200 and destination country gas types.
Preparatory steps and initial checks before servicing.
Detailed checks of panes, decorative elements, and air inlets.
Checking air flue system and automatic gas control operation.
Final checks after service, including firing up and shutting down.
Procedures for replacing batteries in the remote and receiver.
Solutions for starting problems and no spark on electrode.
Diagnosing controller coil voltage and control flame issues.
Causes and solutions for F04/F06 and F06 error codes.
Causes and solutions for F07, F09, F46 error codes.
Proper disposal of packaging and batteries as hazardous waste.
What the warranty covers and does not cover.
Procedures for making claims and consequences of modifications.
General| Model | LEO/45/68 |
|---|---|
| Category | Indoor Fireplace |
| Fuel Type | Wood |
| Material | Steel |
| Color | Black |
| Ecodesign compliant | Yes |
| Meets the requirements of BlmSchV 2 | Yes |
To Next Page
