Kratki SIMPLE BOX - Final Procedures; Location Selection and Chimney Connection; Maintenance Guidelines

30
EN
SELECTION OF THE LOCATION OF THE DEVICE IN A DEDICATED BUILDING.
The choice of the place of installation of the device in a dedicated installation SIMPLE EASY BOX should
be dictated by the location of the chimney to which it will be connected. Dedicated installation gives
you several possibilities of chimney exit depending on the conditions created by the existing chimney
installation, or depending on the way of chimney exit will be nally selected.
CONNECT THE DEVICE TO THE CHIMNEY INSTALLATION.
The connection of the replace to the chimney installation should respect the local construction law
and the guidelines contained in the manual of the device itself, for which the SIMPLE BOX is only an
accessory. If there are no local guidelines for the installation of the appliance and its chimney installa-
tion, follow the instructions for the appliance and its connection included with the purchased replace.
MAINTENANCE
WARNING!!!!
All maintenance work should be carried out on a cooled down unit at least 12 hours after it has been
extinguished.
ATTENTION!!!!
Maintenance of the device may only be performed by a qualied service technician. It should also be
remembered that each heating appliance requires chimney sweeps in accordance with the guidelines
of the local building code, but at least once a year.
• The device should be periodically inspected at least once a year.
• Cleaning should take place regularly or as excess ash emerges.
• No changes may be made to the design of the unit.
• The device should not be cleaned with corrosive agents.
• When replacing individual components, use only original parts available from the manufacturer.