EasyManua.ls Logo

KRATOS SAFETY FA 60 018 00 User Manual

KRATOS SAFETY FA 60 018 00
32 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN 795:2012 Type B
FA 60 018 00
ANCRAGE BÉTON / CONCRETE ANCHOR
BETONVERANKERUNG / ANCLAJE PARA HORMIGÓN
ANCORAGGIO PER CALCESTRUZZO / BETONNEN VERANKERING
KOTEW DO BETONU / DISPOSITIVO DE FIXAÇÃO NO BETÃO
BETONANKER / BETONIANKKURI
BETONGANKER / BETONGANKARE
KRATOS SAFETY
689 Chemin du Buclay
38540 Heyrieux - FRANCE
Tel : +33 (0)4 72 48 78 27
Fax : +33 (0)4 72 48 58 32
www.kratossafety.com info@kratossafety.com
BKLKT40-06
Last updated: 07/2019
European Regulaon (EU) 2016/425
Question and Answer IconNeed help?

Do you have a question about the KRATOS SAFETY FA 60 018 00 and is the answer not in the manual?

KRATOS SAFETY FA 60 018 00 Specifications

General IconGeneral
ModelFA 60 018 00
CategoryConstruction Equipment
AdaptabilityUniversal
ErgonomicsLightweight
ColorYellow

Summary

Product Identification and Markings

Manufacturer and Product Reference

Details on the manufacturer's name and product reference number.

Usage Instructions and Compliance Marks

Guidance on product usage and conformity indications.

Load Capacity and Single-User Limit

Specifies the maximum load capacity and single-user limitation.

Standard Compliance and Resistance

Details minimum product resistance and compliance with standards like EN 795.

Batch and Serial Number Identification

Information on batch numbers, serial numbers, and individual lot numbers.

Instructions for Use and Precautions

Product Components Overview

Lists and identifies the main components of the anchorage system.

Installation Procedure

Step-by-step guide for correctly installing the anchorage point.

Critical Safety Warnings

Important warnings regarding use after fall arrest and general safety advice.

Pre-Use Checks, Specifications, and Maintenance

Pre-Use Inspection and Component Checks

Guidelines for checking components and ensuring readiness before each use.

Technical Specifications and Compatibility

Details product specifications, materials, and compatibility with other systems.

Inspection, Maintenance, and Storage

Procedures for periodic inspections, maintenance, and proper storage of the equipment.

Declaration of Conformity Information

Notified Bodies and Usage Guidelines

Notified Bodies for Type Approval

Lists organizations responsible for EU type inspection and production control.

General Usage and Manual Retention

Advises against unauthorized use and recommends retaining the manual.