To Next PageTo Next Page
Need help?Do you have a question about the Kraun KW.01 and is the answer not in the manual?
Explains simplified remote access without complex network settings.
Details front and back panel components, including microphone, lens, LEDs, and ports.
Guides connecting the camera, installing software, and viewing video for initial setup.
Instructions on how to view the camera feed from a remote location using the software.
Guides setting up a wireless connection for the IP camera using Wi-Fi.
Displays model, firmware, IP CAM ID, registration status, and network/video settings.
Allows viewing the IP camera's live video feed, requiring an ActiveX component.
Configures wired Ethernet connection settings, including DHCP and static IP options.
Sets up wireless security parameters like SSID, WEP, and WPA-PSK for Wi-Fi connection.
Configures advanced network settings, primarily PPPoE connection for ADSL services.
Adjusts video quality, resolution, frame rate, brightness, and other visual parameters.
Configures settings for 3G mobile access and RTSP streaming for remote viewing.
Configures email/FTP alarms, motion detection, NAS recording, and event scheduling.
Manages LEDs, date/time, admin account, and system reboot.
Covers firmware upgrades, safe mode, and factory default reset.
Lists the key functionalities and capabilities of the IP camera.
Provides detailed technical specifications of the IP camera hardware and software.
General