Kraus KHU15 User Manual

Step 4. Cut Countertop
Cut the opening on the countertop by carefully following the traced line.
NOTE: Please use the appropriate saw that best fits your countertop material.
Step 5. Set up Mounting Brackets
Turn the countertop over and align the sink with the countertop. Decide the location for mounting brackets.
Mounting holes should be 1/2″ from the edge of the sink.
Step 6. Drill Hole in Countertop
Drill 3/8″ diameter x 1/2″ deep hole in the countertop.

Kraus KHU15 Specifications

General

Brand	Kraus
Model	KHU15
Category	Kitchen & Bath Fixtures
Language	English