3. Place the faucet on the countertop.
4. If the countertop is thin or the faucet is being mounted on the sink itself, place the countertop extender (#11)
from underneath the countertop and tighten it onto the tailpiece (#5). **OPTIONAL**
5. Place the metal washer (#6) onto the tailpiece (#5) from underneath
the countertop.
6. Place the fixing set (#7) onto tailpiece (#5) underneath the countertop and tighten it.
7. Connect pullout hose (#10) to copper tube. see details on page 2
8. Place the weight (#8) onto pullout hose (#10).
9. Screw in the hot and cold waterlines (#9) and attach them to the water supply.
To Next Page
Need help?
General
