9
Step 6. Flush spray hose
Remove spray head (1) from
spray hose (7). Hold tip of
spray hose (7). Turn faucet on
and let the water run for 60
seconds to flush any debris.
Step 7. Check for leaks
Check for leaks at the
connections. Retighten if
necessary.
7
1
NOTE: In compliance with CEC standards, this faucet is designed with a 1.8 gpm flow rate. At your discretion, you may modify the
product with the included 2.2 gpm restrictor. Please note that doing so will remove the capability of this product to meet specific
low-flow standards. Kraus is not liable for any alterations made to the product post-sale, and highly advises that you consult with
your local or statewide plumbing enforcement agency prior to any modification.
To Next Page
Loading...
Need help?
General
