KREAFUNK AGROOVE Small Guide

aGROOVE
aGROOVE CANNOT TURN ON
Charge aGROOVE for 6-8 hours and try turning it on again.
aGROOVE CANNOT BE CHARGED
In many cases, it is simply the cable that does not work.
Please try using a dierent cable to make sure that the pro-
blem is correctly identied.
aGROOVE HAS A WEIRD SOUND
Please try restarting aGROOVE: Go to Bluetooth settings and
disconnect the speaker. On an iPhone this is simply done by
pressing the info icon on the right and then “Disconnect”. If
this is done on all of the devices previously connected to the
speaker, then you have restarted aGROVE. In most cases,
the speaker will sound perfect again. If this does not work,
please try a dierent sound source to see whether you are
experiencing the same issues. Some sound source apps
have bad Bluetooth stability, which causes problems for the
speaker.
BLUETOOTH IS NOT WORKING
When aGROOVE is turned on a ashing blue light is shown.
This indicates that the speaker is on. To activate Bluetooth
press the on/o button again. The light changes to a
ashing light that shifts between blue and green indicating
that the Bluetooth is on. Now it is possible to connect to the
aGROOVE.
Bluetooth is very sensitive and therefore it is important
always to remember turning Bluetooth o, when the electro-
nic device should not be connected to the speaker. If a phone
that previously has been connected to the speaker, has its’
Bluetooth turned on and another phone tries connecting to
the speaker, the rst phone might interrupt the connection.
The best way to avoid connection problems if there are
multiple users of the product, is simply to delete it from the
electronic devices after use.
If you have followed the above-mentioned guidelines and
you are still experiencing problems with aGROOVE, please
contact our customer service.
- 6 -
M M X V I I

KREAFUNK AGROOVE Specifications

General

Brand	KREAFUNK
Model	AGROOVE
Category	Speakers
Language	English