KREAFUNK AGROOVE User Manual

7
English
Operation:
1. Bluetooth Pairing
This device is built-in battery. Press
and hold on button for 3-4 sec-
onds to start the device, into Auto
paring mode, with the BLUE light in
quick ash.
(If previous paring is failed, press
button once to enter into new
searching and pairing model with
the BLUE light on and GREEN light
quick ash.)
Or press and hold on button for
4-5 seconds directly to enter into
searching and pairing model, with
the BLUE light on and GREEN light
quick ash.
Use your mobile phone to search
the device ”aGROOVE”. If a pass-
word is needed, then write ”0000”.
Wait for 3-5 seconds, the pairing
is successful with the BLUE light
keeps on, while the GREEN light o.
Then you can press and hold on
button for 3-4 seconds to turn o
the device after GREEN light on.
2. Bluetooth Music
Start your mobile phone’s media
player and choose your favorite
song, then you will hear the nice
music from the aGROOVE with the
BLUE light in slow ash.
When you want to change the song,
press button to pick the next
song, and press button to pick
the previous song.
When you want to adjust volume,
press and hold the button
to increase the volume, press and
hold the button to reduce
the volume.
Press button to pause or
play the music. When there is a call
incoming, please answer by your
mobile phone. After the call, it will
start playing your music again.

KREAFUNK AGROOVE Specifications

General

Brand	KREAFUNK
Model	AGROOVE
Category	Speakers
Language	English