Safety
• Follow your drill manufacturer’s instructions and safety guidelines.
• The bit cutting edges are sharp. Wear gloves when handling.
• Keep hands away from the rotating bit.
• Always wear eye protection.
• The drill bit gets hot when drilling plugs. Allow the bit to cool
before handling.
• To reduce heat buildup, use the Kreg Jig
®
dust collection
attachment connected to a shop vacuum.
• Use the Plug Cutter guide block only in a Kreg Jig
®
K3, K4, or K5
base secured to your work surface. Do not attempt to hold the jig in
place by hand or clamp it to a workpiece with an ordinary clamp.
Parts
A
B
C
D
Items Included:
(A) Plug Cutter guide block
(B) Plug Cutting Bit (for standard pocket holes)
(C) Stop collar
(D) Hex wrench
To Next Page
Loading...
