To Next PageTo Next Page
Need help?Do you have a question about the Kreg ADAPTIVE CUTTING SYSTEM and is the answer not in the manual?
General| Plunge Saw Motor | 12 amp |
|---|---|
| Category | Cutter |
| Power Source | Corded Electric |
| Arbor Size | 20 mm |
| Blade Diameter | 6 1/2 inches |
| Blade Speed | 12000 RPM |
| Guide Track Length | 62" (1575mm) |
| Max Cutting Thickness at 90 degrees | 2 1/8 inches |
| Max Cutting Thickness at 45 degrees | 1 1/2" (38mm) |
| Max Cutting Depth at 90° | 2 1/8 inches |
| Max Cutting Depth at 45° | 1 1/2" (38mm) |
| Motor Power | 12 amp |
| No-Load Speed | 12000 RPM |
| Dust Port Size | 1 1/4 inches |
