Need help?Do you have a question about the Kreg Accu-Cut KMA2700 and is the answer not in the manual?
General| Product Type | Circular Saw Guide |
|---|---|
| Material | Aluminum |
| Category | Cutting Tools |
| Type | Saw Guide |
| Compatibility | Circular Saws |
| Features | Accurate cuts, portable design |
Follow safety precautions to reduce risk of fire, electric shock, and personal injury when using electric tools.
Information about the Accu-Cut's design and compatibility with circular saws, especially regarding upper blade guards.
Instructions on assembling the two tracks using connector bars and tightening set screws.
Guidance on positioning the filler strip on the sled for different saw base plate edges.
Steps to attach a circular saw to the sled using base-plate clamps and set screws.
How to position and align the saw/sled assembly on the track rails and adjust for blade clearance.
Procedure for positioning the indicator clip and cursor on the sled for proper alignment.
Instructions for reinstalling the indexing stop to maintain saw position after removal.
Process for trimming the guide strip for zero-clearance support next to the blade to minimize chip-out.
How to mark the workpiece cutline and position the track with the guide strip edge on it.
Placing the saw/sled assembly on the starter block and adjusting the depth of cut for the blade.
Procedure for making a cut, including powering the saw, applying pressure, and stopping the blade.
Description of Kreg Track Clamps and their recommended uses for securing the track to workpieces.
Information on where to purchase replacement guide strips for the Accu-Cut™.
To Next Page
