Need help?Do you have a question about the Kreg Jig R3 and is the answer not in the manual?
General| Material | Glass-filled nylon |
|---|---|
| Drill Guide Material | Hardened steel |
| Pocket Hole Sizes | Standard |
| Adjustable Depth Setting | Yes |
| Drill bit diameter | 3/8" |
| Drill Guide Spacings | 3/4", 1-1/4" |
| Compatible Material Thickness | 1/2" to 1-1/2" |
| Includes | Stepped drill bit, depth collar, Allen wrench |
| Screw Sizes | #6, #7, #8, #9 |
Warning about chemicals known to cause cancer and birth defects.
Essential safety rules for operating the Kreg Jig R3 to prevent injury.
Warning about potential health risks from construction dust exposure.
Adjusts the stop collar on the drill bit to match workpiece thickness for precise drilling.
Sets the jig's sliders to align with workpiece thickness for optimal screw placement.
To Next Page
