Need help?Do you have a question about the Kreg Jig K4 and is the answer not in the manual?
General| Material | Glass-filled nylon |
|---|---|
| Drill Guide | Yes |
| Drill Guide Material | Hardened steel |
| Clamping Method | Toggle clamp |
| Adjustable Fence | Yes |
| Dust Collection Shroud | Yes |
| Compatible Material Thickness | 1/2" to 1-1/2" |
| Drill Guide Spacing | 9/16", 7/8", 1-7/16" |
| Drill Bit Size | 3/8" |
| Includes | Stepped drill bit |
| Hole Pattern | Standard |
| Clamp Type | Toggle Clamp |
Essential safety measures for operating the Kreg Jig and related tools, including personal protective equipment and safe work practices.
Warnings about chemicals known to cause cancer and birth defects in California, requiring hand washing after handling.
Instructions on how to adjust the drill guide for proper pocket hole positioning based on workpiece thickness.
Guidance on selecting appropriate Kreg screws (coarse or fine thread) based on material type for strong joints.
Steps for setting the drill bit stop collar using the setup gauge to control drilling depth accurately.
Instructions for adjusting the clamp pad for secure and stable workpiece holding during drilling.
Detailed procedure for drilling pocket holes, including bit speed, chip removal, and stop collar usage.
Methods for joining workpieces using drilled pocket holes and Kreg screws, ensuring proper alignment and secure assembly.
To Next Page
