Need help?Do you have a question about the Kreg Rip-Cut KMA2685 and is the answer not in the manual?
General| Product Type | Circular Saw Guide |
|---|---|
| Brand | Kreg |
| Model | KMA2685 |
| Compatibility | Most Circular Saws |
| Color | Blue |
| Material | Aluminum |
| Cutting Capacity | 24 inches |
Follow all safety warnings and instructions to reduce risk of fire, electric shock, and personal injury.
Attach the edge guide to the rail using screws for right or left-hand operation.
Adjust the filler strip on the sled for saws with angled or flat leading edges.
Securely attach the saw base plate to the sled clamps, ensuring blade guard freedom.
Verify cursor placement in the sled holder for accurate measurements.
Mount the indexing stop for precise re-mounting of the saw on the sled.
Insert the sled wedge into the rail channel and slide onto the rail.
Align the cursor with the zero mark and verify the minimum safe cut width.
Install a 40-tooth blade, set blade depth, and support workpiece and cutoff.
Slide sled, align cursor, engage lock, and make the cut with steady motion.
To Next Page
