To Next PageTo Next Page
Need help?Do you have a question about the Kreg K4 and is the answer not in the manual?
General| Type | Pocket Hole Jig |
|---|---|
| Drill Guide | Yes |
| Clamping Method | Toggle clamp |
| For Use With | Wood |
| Adjustable | Yes |
| Stock Thickness Capacity | 1/2" to 1-1/2" |
| Product Type | Jig |
| Model | K4 |
| Drill Guide Size | 3/8" |
| Dust Collection | Yes |
| Screw Size | #6 - #14 |
| Included Components | Jig, Drill Bit, Driver Bit |
Essential safety advice including personal protective equipment, handling the drill bit, and securing workpieces.
Information on California Proposition 65 warnings for chemical exposure and wood dust.
Details and illustration of all included parts and components of the Kreg Pocket-Hole Jig K4.
Instructions on how to adjust the drill guide to match the workpiece thickness for optimal pocket hole placement.
Explanation of Kreg's coarse and fine thread screws and their suitability for various wood materials.
Reference chart for selecting screw length and Kreg Jig setting based on material thickness.
Guidance on correctly setting the drill-bit stop collar using the step bit and hex wrench.
Instructions for adjusting the clamp pad to ensure secure and stable workpiece holding.
Guidelines for optimal pocket hole spacing based on material width and using the three-hole drill guide.
Step-by-step instructions for drilling pocket holes, emphasizing drill speed, chip clearance, and stop collar usage.
Guidance on selecting the correct screw size and driving pocket-hole screws for strong, finished joints.
Details on the vacuum port attachment, its function in chip collection, and benefits for drilling.
Techniques and advice to avoid wood splitting, including testing, screw choice, and driving methods.
