EasyManua.ls Logo

Kreg KCS-DFMT User Manual

Kreg KCS-DFMT
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 | technicalsupport@kregtool.com
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to
improve. Share your feedback so we can keep growing and
innovating for you. www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety
precautions in this manual. Failure to do so could result in serious injury.
Save manual for future reference.
Drawer Front Mounting Jig
Manual applies to Item # KCS-DFMT, KCS-DFMT-PRO, KCS-DFMT-INT

Table of Contents

Questions and Answers:

Kreg KCS-DFMT Specifications

General IconGeneral
BrandKreg
ModelKCS-DFMT
CategoryTools
LanguageEnglish

Summary

Safety Precautions

Pre-Operation

Recommended Tools and Materials

Lists tools and materials needed for setup and operation of the jig.

Product Description

Details the components and parts included with the drawer front mounting jig.

Operation

Place Drawer Front Mounting Clamps

Instructions for positioning and securing the jig's clamps onto the drawer box.

Place Drawer Front

Steps for aligning and temporarily holding the drawer front in the desired position.

Install Drawer Front

Guidance on drilling pilot holes and permanently attaching the drawer front to the box.

Inset Drawer Fronts

Care and Cleaning

Troubleshooting

Related product manuals