Kreg KCS-DFMT - Pre-Operation; Recommended Tools and Materials; Product Description

3
Pre-Operation
Review this section before you begin. Ensure you have all tools/materials on
hand and compare the package with the items listed in the Hardware Included
and Product Description sections. If any item appears missing or lost, do not
use this product. Contact Technical Support or return product to place of
purchase.
Recommended Tools/Materials (NotIncluded)
Phillips screwdriver
Drill bit
Screws Drill Tape measure Clamp
Product Description
A
B
C
Part Description Part Description
A Left drawer-front clamp
C Setup and spacer shim set
(KCS-DFMT-PRO only)
B Right drawer-front clamp