To Next PageTo Next Page
Need help?Do you have a question about the Kreg KPHJ310 and is the answer not in the manual?
General| Brand | Kreg |
|---|---|
| Model | KPHJ310 |
| Category | Tools |
| Clamp Style | Handheld |
| Clamping Method | Manual |
| Drill Bit Size | 3/8 inch |
| Max Material Thickness | 1-1/2 inch |
| Workpiece Thickness Range | 1/2 inch to 1-1/2 inch |
| Included Components | Drill bit, Depth collar, Screw clamp |
Essential safety rules for operating the Kreg Jig and associated tools to prevent injury.
Information regarding potential exposure to chemicals known to cause cancer or reproductive harm.
Details the items included with the Kreg Pocket-Hole Jig Model KPHJ320.
Details the items included with the Kreg Pocket-Hole Jig Model KPHJ310.
Procedure for accurately measuring the thickness of the material to be drilled.
Instructions for adjusting the stop collar on the drill bit according to material thickness.
Guidance on placing the material thickness stop on the drill guide for accurate depth.
Steps for securing the Kreg Jig and drilling the pocket hole with the drill bit.
Methods for aligning the material thickness stop and clamping the workpiece joint.
Process for inserting and driving pocket-hole screws effectively into the drilled holes.
Instructions on how to adjust or reconfigure the Kreg Jig for different drilling setups.
Recommended hole spacing for narrow or thin wooden pieces.
Recommended hole spacing for wide or thick wooden pieces.
Steps for correctly positioning and securing the universal clamp pad adapter.
Procedure for removing the material thickness stop for repair tasks.
Determining the correct jig placement on the workpiece for repair operations.
Securing the jig and drilling pocket holes during repair work.
A chart correlating material thickness with appropriate Kreg screw lengths.
