Kreg KPHJ230 User Manual

OWNER’S MANUAL
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 | technicalsupport@kregtool.com
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to
improve. Share your feedback so we can keep growing and
innovating for you. www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety
precautions in this manual. Failure to do so could result in serious injury.
Save manual for future reference.
Micro Pocket-Hole Jig
Manual applies to Item # KPHJ230

Kreg KPHJ230 Specifications

General

Brand	Kreg
Model	KPHJ230
Category	Tools
Language	English

Summary

Safety Precautions

Pre-Assembly

Product Description

Lists and illustrates all components included in the Micro Pocket-Hole Jig kit.

Assembly

Determine the Material Thickness

Instructions on using the gauge to find the correct material thickness setting.

Set the Stop Collar

Steps to adjust the stop collar on the drill bit for precise depth control.

Position the Material Thickness Stop

Guide on adjusting the jig's stop to match the material thickness.

Configure the Jig

Instructions on connecting the drill guides to set up the jig for use.

Operation

Clamp the Jig and Drill the Holes

Process for securing the jig and drilling the pocket holes into the workpiece.

Recommended Hole Spacing Configurations

Guidelines for optimal placement of pocket holes on narrow and wide pieces.

Clamp the Joint in Place

Methods for clamping workpieces together for face and edge joints.

Drive the Screws

Steps for driving Kreg screws into the pre-drilled pocket holes for secure joinery.

Tips

Using the Clamp Pad Adapter

Instructions on how to attach and use the clamp pad adapter for improved clamping.

Using the Jig for Repair Applications

Guidance on adapting the jig for making repairs on existing projects.

Care and Cleaning

Troubleshooting

Accessories