2
Safety Precautions
WARNING Before using an electric tool with this product, read and follow the
tool manufacturer’s instructions and safety precautions in addition to the safety
precautions below to reduce risk of serious injury from hazards such as re,
electric shock, or rotating drill bit.
■ Always follow the written safety instructions for using your jig.
■ Follow your drill manufacturer’s safety guidelines.
■ Always wear personal protective equipment certied as such, including
safety glasses, hearing and respiratory protection. When using a power
tool, always follow the manufacturer’s personal protective equipment
requirements.
■ The drill bit is sharp. Handle with care.
■ Do not attempt to hold the jig in place with your hand while drilling. Secure
the jig in place with a clamp.
■ Do not allow familiarity gained from frequent use of your tools to replace safe
work practices. A moment of carelessness is sufcient to cause severe injury.
WARNING Avoid awkward hand positions where a sudden slip could cause
contact with the rotating bit.
WARNING Do not operate this tool or any machinery while under the inuence
of drugs, alcohol, or medications.
WARNING This product can expose you to chemicals including Acrylonitrile
and other chemicals, which are known to the State of California to cause
cancer and reproductive harm. For more information go to www.P65Warnings.
ca.gov.
WARNING Drilling, sawing, sanding, or machining wood products can expose
you to wood dust, a substance known to the State of California to cause
cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection. For more information go to www.P65Warnings.ca.gov.
Table of Contents
Safety Precautions . . . . . . . . .2
Pre-Assembly . . . . . . . . . . . .3
Assembly . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . .6
Tips . . . . . . . . . . . . . . . .10
Care and Cleaning . . . . . . . . 12
Troubleshooting. . . . . . . . . . 12
Accessories . . . . . . . . . . . . 12
To Next Page
Loading...
