Kreg KCS-DFMT - Safety Precautions

2
Safety Precautions
WARNING Before using a power tool with this product, read and follow the
tool manufacturer’s instructions and safety precautions in addition to the safety
precautions below to reduce risk of serious injury from hazards such as re,
electric shock, or rotating saw blade.
■ Follow your tool’s manufacturer’s safety guidelines.
■ Always wear personal protective equipment you certify as adequate in
addition to what your saw manufacturer requires.
■ Do not allow familiarity gained from frequent use of your tools to replace safe
work practices. A moment of carelessness is sufcient to cause severe injury.
WARNING Dress properly. Do not wear loose clothing or jewelry. Keep hair,
clothing, and gloves away from moving parts. Failure to do so can result in
clothing, hair, or jewelry becoming caught in moving parts, causing serious
injury.
WARNING Always wear certied personal protective equipment, including
safety glasses, hearing protection, and respiratory protection. When using a
power tool, always follow the manufacturer’s personal protection equipment
requirements.
WARNING Keep hands and body parts clear of pinch points when clamping
and unclamping to avoid injury.
WARNING Do not operate this tool or any machinery while under the inuence
of drugs, alcohol, or medications.
WARNING This product can expose you to Acrylonitrile and other chemicals
which are known to the State of California to cause cancer. For more
information go to www.P65Warnings.ca.gov.
WARNING Keep magnetic shims away from pacemakers. Magnets can
generate strong elds that may damage pacemakers. In addition, keep shims
away from children and magnetically sensitive equipment.
Table of Contents
Safety Precautions . . . . . . . . .2
Pre-Operation. . . . . . . . . . . .3
Operation . . . . . . . . . . . . . .4
Inset Drawer Fronts. . . . . . . . .7
Care and Cleaning . . . . . . . . .7
Troubleshooting. . . . . . . . . . .7