To Next PageTo Next Page
Need help?Do you have a question about the Kreg 720PRO and is the answer not in the manual?
General| Type | Pocket-Hole Jig |
|---|---|
| Dust Collection | Yes |
| Warranty | Limited Lifetime |
| Material | Steel, Glass-Reinforced Nylon |
| Drill Bit Size | 3/8-inch |
| Max Material Thickness | 1-1/2-inch |
| Included Accessories | Drill Bit, Depth Collar, Allen Wrench |
| Includes | Drill Bit, Depth Collar, Allen Wrench |
Lists and illustrates all parts included with the Kreg Pocket-Hole Jig 700-Series.
Details where the KPHJ720 Jig stores its included tools like the drill bit and driver bits.
Explains how to adjust the clamp pressure knob on the Kreg Jig for optimal clamping.
Describes the two extension wings on the jig and how to position them for stability.
Details how to mount the Kreg Jig directly to a workbench for added stability.
Guides on how to attach the dust collection blade and adapter for dust capture.
Instructions for attaching the dock adapters to the Kreg Jig.
Explains how to attach the material support wings to the assembled dock adapters.
Instructions on how to fold material support wings up for storage or down for use.
Details how to secure the docking station to a workbench using screws.
Step-by-step guide to assemble the adjustable stop base using its components.
Explains how to attach the adjustable stop arm to the base in different configurations.
How to use the thickness gauge and set the stop collar on the drill bit.
Steps to stabilize the jig using docking station wings or extension wings.
Guides on aligning the workpiece in the jig using drill guides and centering marks.
Instructions on how to press the jig handle to clamp the workpiece securely.
How to configure and attach the adjustable stop for consistent pocket holes.
Details on placing the adjustable stop onto the material support wing and securing it.
Step-by-step instructions for drilling pocket holes using the Kreg Jig.
Chart and notes on selecting the correct pocket-hole screw based on material thickness.
How to drive pocket-hole screws into the drilled holes using a driver bit.
Explains how to use the Kreg Jig in both vertical and horizontal orientations.
Details on using the pocket-hole jig clamp to secure the jig on a workbench.
Instructions for detaching the Kreg Jig from a mounted docking station.
Steps to detach the jig and dock adapters from an unmounted docking station.
Recommendations for periodic maintenance, such as applying oil to the handle linkage.
Guidelines for cleaning the Kreg Jig, including vacuuming and wiping surfaces.
Displays images and names of optional accessories for the Kreg Jig.
