EasyManuals Logo

Kreg Jig R3 User Manual

Kreg Jig R3
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
800-447-8638
Safety Guidelines
!
!
!
WARNING: This product contains one or more
chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
Wash hands after handling.
WARNING
Read this manual and these safety guidelines. Learn the
applications and limitations of the tool as well as the hazards
specictoit.Operatingthetoolbeforeunderstandingsafeand
proper use could result in personal injury.
Always wear eye, hearing, and respiratory protection
specicallydesignedandcertiedassafetyequipment.
•Thedrillbitissharp.Handlewithcare.
Avoid awkward hand positions where a sudden slip could
causecontactwiththerotatingbit.
•Properlysecureyourworkpiecebeforedrilling.
Do not attempt to hold the pocket-hole jig in place with your
hand while drilling. Secure it to the workpiece with a clamp.
Follow your drill manufacturer’s safety guidelines.
Do not operate this tool or any machinery while under the
inuenceofdrugs,alcohol,ormedications.
•Donotallowfamiliaritygainedfromfrequentuseofyourtools
to replace safe work practices. A moment of carelessness is
sufcienttocausesevereinjury.
WARNING Dustcreatedbysanding,sawing,grinding,
drilling, and other construction activities may contain chemicals
knowntotheStateofCaliforniatocausecancerandbirthdefects
or other reproductive harm.
Examples of these chemicals are:
•Leadfromlead-basedpaints
Crystallinesilicafrombricks,cement,andothermasonryproducts
•Arsenicandchromiumfromchemicallytreatedlumber
Your risk from exposure to these chemicals depends on how often
you do this type of work. To reduce your exposure, work in a
well-ventilatedareawithapprovedsafetyequipment.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kreg Jig R3 and is the answer not in the manual?

Kreg Jig R3 Specifications

General IconGeneral
MaterialGlass-filled nylon
Drill Guide MaterialHardened steel
Pocket Hole SizesStandard
Adjustable Depth SettingYes
Drill bit diameter3/8"
Drill Guide Spacings3/4", 1-1/4"
Compatible Material Thickness1/2" to 1-1/2"
IncludesStepped drill bit, depth collar, Allen wrench
Screw Sizes#6, #7, #8, #9

Related product manuals