25
(SECTION THREE: Anatomy of an Evolution e Series Amplifier continued)
Power
7 IEC Power Cord Receptacle
The power receptacle is for use with the provided 20 amp AC power
cord. Use only the power cord supplied with your Evolution e Series
amplifier.
8 Power Breaker Switch
Place this switch in the up position to put the amplifier in stand-by
mode. Place the switch in the down position to turn off the amplifier.
10 Speaker Fuses
The speaker fuse protects the 2250e and 3250e in case of overload or
malfuction.
To Next Page
Loading...
