19
Back Panel Description
See Figure 2, 3, and 4 on the previous pages
The amplifier back panel provides access to the input and output connections,
12 V trigger inputs and outputs, and the AC power connection and switch. Back
panel features and their descriptions follow:
Outputs
3 Loudspeaker Binding Posts (one pair per channel)
Each channel has one positive and one negative binding post. They accept
spade lugs only.
Inputs
4 CAST Inputs (one per channel)
These are CAST inputs with 4-pin bayonet connectors, for use with Krell
CAST-equipped preamplifiers and components.
5 Single-ended Inputs (one per channel)
These are single-ended analog inputs with RCA connectors.
6 Balanced Inputs (one per channel)
These ar
e balanced analog inputs with XLR connectors.
(
SECTION THREE: Anatomy of an Evolution Amplifier continued)
continue
d
To Next Page
Loading...
