KRHÜNER 52928 - Troubleshooting

TROUBLESHOOTING
Problem Possible cause Possible soluon

debris

2. Filters clogged or dirty
3. Filters are out of
service



Brush roller does not spin Brush roller clogged by


 
completely
2. Filters clogged or dirty

correctly

5. Nozzle or dirt passage
clogged


completely




to remove debris
Vacuum suddenly turns


2. Filters clogged or dirty
3. Vacuum overheat




retry

charge

2. Vacuum overheat



retry
 
2. Filters clogged or dirty

