What to do if my Krigsvoll GeBe POWERMAN 1000is Inverter generator won't produce power?
If your Krigsvoll Inverter generator won't produce power, check the DC protector. If the safety device (DC protector) is set to “OFF”, press it to the “ON” position. Also, check the AC pilot light (green). If it goes off, stop the engine and then restart it.
Why my Krigsvoll Inverter engine can't start?
If your Krigsvoll Inverter engine won't start, several factors could be the cause. First, check the fuel level; if the fuel tank is empty, add fuel. If there is fuel, the fuel filter might need cleaning. Also, check the oil level and add engine oil if it is low. Finally, inspect the spark plug. If it's dirty with carbon or wet, remove the carbon or wipe the spark plug dry. If the ignition system is faulty, consult an authorized dealer.
Stresses the importance of proper operation, maintenance, and adherence to local laws and safety warnings for safe and effective generator use.
Covers essential safety practices such as proper connection, grounding, and keeping the area clear.
Explains that warning labels on the machine remind users of safety regulations.
Details the various controls and their functions on the generator's control panel.
Explains the operation of the 3-in-1 switch knob for starting and stopping the engine.
Explains the function of oil warning, overload, and AC pilot lights.
Explains the function and operation of the DC protector for the 12V output.
Details how to open, close, and operate the fuel tank cap and its air vent knob.
Explains the purpose of the ground terminal for electrical shock prevention.
Describes the Engine Smart Control system and its effect on engine speed and fuel consumption.
Describes the terminal for connecting special cables for parallel running of two generators.
Emphasizes the importance of pre-operation checks and owner responsibility for generator condition.
Provides warnings and instructions regarding fuel handling, filling, and type.
Instructs on checking and filling engine oil, including recommended types and quantity.
Mentions that the generator can be used at rated output load under standard atmospheric conditions.
Provides a step-by-step guide on how to start the generator engine.
Details the procedure for safely shutting down and stopping the generator engine.
Guides on safely connecting electrical devices to the generator's AC outlets.
Explains how to charge a battery using the generator's DC output, including safety precautions.
Provides first-aid instructions for contact with battery acid (external, internal, eyes).
Details the power output and application range for various AC and DC loads.
Introduces the importance of periodic inspection, adjustment, and lubrication for generator safety and efficiency.
Advises consulting a franchised dealer for maintenance if unfamiliar, and stopping the engine before work.
Provides a detailed schedule for routine checks and maintenance tasks based on time or usage hours.
Guides on inspecting, cleaning, and checking the spark plug's type and gap.
Instructs on how to safely drain and replace the engine oil, noting precautions for hot oil.
Details how to remove, clean, oil, and reinstall the air filter element.
Explains how to clean the muffler screen, spark arrester, and related parts.
Guides on removing, cleaning, and reinstalling the fuel tank filter.
Provides instructions for removing, cleaning, and reinstalling the fuel filter.
Outlines preventive procedures for long-term storage, including draining fuel and engine protection.
Lists common engine starting and power production problems with their causes and solutions.
Lists the technical specifications and parameters of the generator, including power, voltage, and engine details.
Presents the wiring diagram for the generator, illustrating electrical connections and components.
Explains how to connect two generators in parallel for increased output power.
A statement confirming the product's compliance with relevant EU directives and standards.
To Next Page
General