The all new sport/3d jet is a masterpiece!! Designed by Italy’s Sebastiano Silvestri. Its
design is based on a hawk aircraft. And then been improved further with aerodynamic
ideas learned on other pattern models.it is a very lightweight and strong construction.
This helps, as the flight speed rang is really impressive!! Designed to take an engine with
100n of thrust, it is setup to be an ideal jet trainer BUT with a 220-250n turbine you have
the ultimate 3d jet!!
This will let you into a totally different flying experience!!
Krill Avanti S jet 2.1m ARF
Assembly manual.
Specification: setup range of installation:
Wingspan:…2.1m Turbine:…..from 100n to 250n
Length:….2.22m radio:…..9-12 channel radio system
Weight: RTF dry (p100)…10.5kg servos:8 digital, metal gear servos.
1.
To Next Page
Need help?
General