Need help?Do you have a question about the Kripsol KS and is the answer not in the manual?
Details about motor, pump, power, insulation, voltage, consumption, frequency, RPM, shaft, bearings, and ambient temperature.
Explains symbols used for personal safety warnings, including Danger, Warning, Caution, and Attention.
Guidance on selecting a dry site with drainage, ventilation, and clearance for installation.
Instructions for anchoring the unit, elevation, pipe material (PVC), and pipe slope.
Ensures supply voltage matches rating plate with a permitted variation of +/- 10%.
Requirements for circuit breakers, RCDs, and protection devices for safe electrical installation.
Instructions for ground connection, power supply, cable types, and motor rotation check.
Pool suction system must provide protection against hair entrapment or suction.
Maximum water speed must be <= 1.2 m/s unless regulations state otherwise for suction systems.
Pipe system must match pump connections; align pipes correctly without force.
Steps for priming the pump, including ensuring no pressure, not running dry, and checking filter cover.
Instructions for preserving the pump during long periods of non-use or freezing conditions.
Steps for disassembling the pump, including disconnecting electricals, hoses, and removing parts.
Steps for assembling the pump, ensuring parts are clean and in perfect condition before coupling.
General| Brand | Kripsol |
|---|---|
| Model | KS |
| Category | Water Pump |
| Language | English |
To Next Page
