To Next PageTo Next Page
Need help?Do you have a question about the KROHNE BM 70 A and is the answer not in the manual?
General| Application | Level measurement |
|---|---|
| Accuracy | ±2 mm |
| Output | 4-20 mA, HART® |
| Housing material | Aluminum, stainless steel |
| Process connection | Flange, thread |
| Approvals | ATEX, IECEx, FM, CSA |
| Protection class | IP66/IP67 |
| Communication | HART, Modbus |
| Process temperature | -40 to +80 °C |
Details warranty terms and user responsibilities for product installation and operation.
Lists available documentation such as condensed instructions and instruction cards.
Tracks firmware versions and their changes for BM 70 A and BM 70 P models.
Details compatibility of PC-CAT software with BM 70x instruments and operating systems.
Defines the intended use and applications for the BM 70 A/P level gauging system.
Explains the FMCW-Radar principle and the modular design of the system.
Covers measured variables, measuring ranges, and block distances for input.
Lists available output variants like HART®, RS 485, and PROFIBUS-PA.
Describes HART communication protocols for point-to-point and multidrop connections.
Details the RS 485 bus for two-way communication and PC configuration.
Explains how breakdown information is accessed and the function of the digital input.
Specifies reference conditions and details error of measurement based on distance.
Defines repeatability, measured value resolution, and hysteresis.
Describes transient recovery, turn-on drift, long-term drift, and ambient temperature effects.
Covers transmission angles and recommendations for positioning on the tank.
Details hazardous location suitability, temperature limits, and environment class.
Discusses physical properties, limitations, and operating pressure for various products.
Provides guidance on cleaning the antenna and general maintenance.
Presents the different models, dimensions, and weights of the BM 70 A/P.
Provides step-by-step instructions for replacing the signal converter, including safety precautions.
Details the electrical connection for power supply, signal outputs, and terminals.
Explains local display variants, key functions, and operator control concepts.
Details settable functions, configuration examples, and descriptions of specific functions.
Covers pointers, error messages, faults, symptoms, and calculation of measured values.
Describes the PC-CAT program for configuration, monitoring, and data analysis.
Lists available power supply versions and their technical data.
Explains how to replace fuses and change operating voltage, including safety steps.
Provides essential safety advice regarding insulation, disconnecting devices, and protection class.
Lists ATEX and FM approvals for hazardous locations.
Details ATEX explosion proofing categories and radio approval information.
Contains the declaration of conformity with relevant European directives and standards.
Lists technical details required for placing an order, including flanges and options.
Lists relevant international and national standards, codes, and directives.
States the company's quality certifications, such as DIN ISO 9001.
Provides a summary of technical specifications across various sections of the manual.
Explains the type code structure and shows examples of nameplates for identification.
Lists spare parts with their part numbers for maintenance and repair.
Provides a form for declaring a device is safe to handle when returned for service or repair.
Offers a checklist for documenting device configuration parameters.
An alphabetical index of topics and their corresponding page numbers for quick reference.
