GENERAL DESCRIPTION 1
3
USB ADAPTER PLUS
www.krohne.com06/2014 - 4003748601 - QS USB_Adapter_Plus R03 en
The USB-Adapter Plus is an adapter to read / write all kind of data to many different converters.
The following overview shows you which parts and software you need:
The scope of delivery includes the USB-Adapter Plus, the cable needed for IFC 100 / 300 and the
printed documentation. Optionally you receive a set of connection cables / connectors for
connection to BATCHFLUX 5500 and old ImoCom type converters.
Signal converter Cable Software
IFC 100 and IFC 300 Standard cable dubox 2x3-pole > dubox 2x4-pole
or IR interface cable
Pactware + DTM + GDC
drivers
BATCHFLUX 5500 C Optional cable M12 5-pole > dubox 2x4-pole
Optional T-connector M12 5-pole
BatchMon Plus
BATCHFLUX 5500 C with
status output
Optional cable M12 8-pole > dubox 2x4-pole
Optional T-connector M12 8-pole
Old ImoCom converters,
eg BATCHFLUX 5015,
IFC 010
Optional cable dubox 1x5-pole > 2x4-pole ImoMon Plus
To Next Page
Loading...