34
Mounting the hood on the carrycot
Do as stated below:
Open up the hood.
Attach the fittings in the carrycot as shown in Figure A. If the fittings are in different
positions during the mounting, it is possible to attach one of them first and then adjust the
placing until it has the same position as the second fitting. Then attach the second fitting.
1
2
A
Instructions for the four-point harness
Do as stated below:
Fit the harness in the buckles that are positioned at the middle of the carrycot,
below the matress. Figure A.
Fit the harness onto your child and close the buckle (click). Figure B.
Adjust the shoulder straps and waist belt of the harness. Figure C.
The harness should fit the child snugly in order to fulfil its function safely.
1
2
3
4
B
A
C
To Next Page
