Kronan Duo - Mounting Carrycot to Chassis

35
Mounting the carrycot onto the chassis
Do as stated below:
Apply the brake before mounting the carrycot.
Undo the two fasteners located outside on the sides of the carrycot. Figure A.
Mount the carrycot onto the chassis and make sure that the two fasteners slide into
the holder on the chassis. Figure A.
Close the fasteners and ensure that the carrycot is firmly mounted by pulling the
foot end gently upwards. Figure B.
1
2
3
4
A
WARNING
Always use the four-point harness when the child
is sitting in the carrycot.